Pyle PD1000BA Instruction Manual - Page 4

ATTENTION • Wireless BT Input mode is priority than all other audio input modes (like MP3 Player, AM/FM Tuner, DVD player, and AUX inputs). All audio inputs will not work if the button is pressed on BT mode status. • First, check if Wireless BT is switched ON or OFF. • Press BT input mode to switched ON or OFF. 1. LIGHT: Light indicates signal intensity 2. MEMORY: After a station has been found, you can store the station by pressing the MEMORY button, and the screen will displays MEM above a channel number, then you can press the number knob to save the station, when the channel number displayis moving from right to left, it means the station has been saved. 3. ST/MONO: Stereo and Mono selector. 4. INPUT: This is used to select the input sources DVD/CD/USB, TUNER, IPOD/ MP3 AUX 5. MENU CONTROL: This is used to increment and decrement level for the selected function of Master Volume, Bass, Treble, Balance, Auto Station seek. 6. AM/FM: Press it to selectAM/FM when it is tuning 7. A/B SPEAKERS OUTPUT SELECTOR: Three mode: A, B, A+B 8. TUNING- / TUNING+: The two keys are used to adjust to the best signal of the stations. 9. FUNCTION DISPLAYED FLUORESCENT WINDOW 10. REMOTE SENSOR WINDOW 11. OPEN/CLOSE CONTROL: Press this key at any play mode will always turn to disc play mode 12. PLAY/PAUSE: Play and pause control 13. REV,FR: Quick/backward search the set 14. NUMBER KEYS: While in radio status, you can choose the music number directly for example choose "28", press "10+" key twice, then press "8", you can get "28" music or station. 15. FWD.FF: It is quick to enterlfonivard search the set 16. PREV: Top a song/top a set 17. STOP: Stop control 18. NEXT, SKPF: Next song/next set 19. BT ANTENNA: Wireless BT receiver antenna for better signal. 20. BT Signal Indicator: The blue LED is off if the BT button is not pressed. The blue LED will be lit if the BT is connected. The blue LED will blink if the Wireless BT is pairing. 6 www.PyleUSA.com 21. BT BUTTON SWITCH: Press BT input mode to switched ON or OFF. 22. PRESS SWITCH: Press switch to power unit ON or OFF 23. IPOD/MP3 JACKS: Connect IPOD/MP3 to these jacks 24. HEADPHONE JACKS: Connect Headphone to these jacks 25. MIC INPUT JACKS 1&2: Connect KARAOKE MIC to these jacks 28. ECHO CONTROL: Turn the knob to adjust the MIC echo level 27. MIC TREBLE: Adjusts the MIC treble 28. MIC BASS: Adjusts the MIC bass 29. MIC VOLUME: Adjusts the volume level. Turn the knob clockwise to increase the MIC volume 30. SUB. OUT VOLUME CONTROL 31. MASTER VOLUME CONTROL: Adjusts the volume level. Turn the knob clockwise to increase the volume 32. USB INPUT JACKS: Please note that this USB will only read MP3 les, does not support PWA les. In case of any damage to this unit, select PAUSE button and disconnect USB or other Input source. REAR PANEL FUNCTION 1. TUNER ANT: Connect AM and FM antennas. 2. R/L OUTPUT 3. VIDEO OUTPUT, S-VIDEO OUTPUT, COMPONENT VIDEO OUTPUT: Press the "relevant" key on remote control to choose the output mode 4/5. DIGITAL AUDIO OUTPUT: One coaxial one optical, this output can connect the amplifier with dolby digital or DTS decoder to play movie with correspondent records. 6. COOLING FAN 7. SUB-WOOFER OUTPUT JACKS 1&2 www.PyleUSA.com 7