Pyle PKNESPRESO70 Instruction Manual - Page 12
a. To make Cold, Frothed Milk, ON/OFF, b. To make hot, Frothed Milk, c. To make Hot Milk, CLEAN
View all Pyle PKNESPRESO70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
1. Choose the appropriate whisk and insert it on the whisk head inside the jug. (see the table above for reference). 2. Pour milk into the jug according to the max & min markings. (See the max capacity for each whisk type above for reference), place the jug on power base. Place the lid securely 3. Choose the mode you want to make with the milk. a. To make Cold, Frothed Milk: Make sure you have inserted the Whisk (whisk with wire spring) and ensure the jug is lled with milk up to the Lower MAX level (150ml.) or at least lled to Min mark. then check that the lid is securely in place, afterward, press and hold the ON/OFF button for 3 seconds till the blue light turns on to start frothing, once the frothing process is completed, the blue light will turn o automatically, now, the frothed milk is ready. b. To make hot, Frothed Milk: Make sure you have inserted the Whisk(whisk with wire spring) and ensure the jug is lled with milk up to the Lower MAX level(150 ml.) or at least lled to Min mark. then check that the lid is securely in place, afterward, press the ON/OFF button brie y, the red light turns on to start frothing, once the frothing process is completed, the red light will turn o automatically, now, the hot & frothed milk is ready. c. To make Hot Milk: In this mode, the whisk is not necessary, so, make sure the whisk is removed, and the jug is lled with milk up to the upper MAX level (300ml Max.) or at least lled to Min mark. then check that the lid is securely in place, afterward, press the ON/OFF button brie y, the red light turns on to start heating milk, once the heating process is completed, the red light will turn o automatically, now, the hot milk is ready. CLEAN THOROUGHLY AFTER EACH USE. 12 www.NutrichefKitchen.com