Pyle PKNESPRESO70 Instruction Manual - Page 14

The lights on the control buttons are blinking, blue lights in used-capsule container is lighted in blue which goes o after 1 minute Tips: You can check easier if the used container is full or not when the blue light is ON. The indicator will blink in red for first use, meaning the internal circuit is empty. Please fill up water tank and open the handle. Press any button to start pump, once water is detected entering the internal circuit, the red indicators becomes blue. The machine starts to heat up automatically when detected water in circuit with 3 buttons blinking. The lights on buttons become steady when the machine is heated up, heating up time is 40 seconds approximately Press the lungo co ee button, before pressing the button, make sure that: • The handle is closed without capsule inside. • The water tank is full. • The water tank is firmly in place, otherwise water may leak. • The drip tray with the used capsule container is completely inserted (never operate the machine without drip tray set (part D shown in "Overview of machine parts and controls"), or hot water will run out when opening handle.). • A large bowl ( 250ml size or above) is placed under the dispenser. • Press the middle button to start flush out. • Open the handle when the flush out process stopped automatically. • Empty the cup. • Flush out cycle is finished 14 www.NutrichefKitchen.com