Pyle PKNESPRESO70 Instruction Manual - Page 13
Fill / Refill Water Tank
![]() |
View all Pyle PKNESPRESO70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
USING THE ESPRESSO MACHINE Fill / Refill Water Tank There are two ways to fill the water tank: Directly into the machine, by using for example a jug, or by removing the water tank. Filling without removing the tank • Raise the water tank lid • Fill the tank up to the "MAX" mark with cold fresh water (the maximum capacity is 0.8 litre), or at least the "Min" mark . • low down the lid Filling by removing the water tank • Hold the water grip at tilting angle as shown in direction 1 to remove the water tank from the machine. • Fill the tank up to the "MAX" mark with cold fresh water (the maximum capacity is 0.8 litre). or at least the "Min" mark . • Slide the water tank slowly on water tank base. When the water tank outlet is inserted in the inlet receptacle, push firmly on the water grip as shown in direction 2 to lock the water tank. Flushing out the machine and internal piping/first use Before using for the first time or after long pauses (e.g. holidays) the machine must be flushed out. This short procedure can flush out and cleans the internal piping thoroughly. • Fill water tank to maximum level. • Plug in the appliance and turn it on. 13 www.NutrichefKitchen.com
![](/manual_guide/products/pyle-pknespreso70-instruction-manual-af9257c/13.png)