Pyle PLMRB29B User Manual - Page 7

GENERAL OPERATION Turn Unit On/Off 噝 Press the power ( turn off the unit. 噝 Press the power ( ) /MODE button on the front panel to turn on the unit, and long press it again to ) button on the remote control to turn the unit on or off. Adjust Volume (VOL) Rotate the VOL knob on the front panel or press the VOL+ increase or decrease the volume level. /VOL- button on the remote control to Adjust Menu Options (SEL) 噝 Press the SEL button on the front panel or on the remote control repeatedly to cycle through the following adjustable audio functions: BASS, TREBLE, BALANCE, FADER, EQ FLAT/POP/ROCK/CLASS/OFF, LOUD ON/OFF, DX/LOC, STEREO/MONO and VOLUME. 噝 Rotate the VOL knob on the front panel or press the VOL+ control to adjust the selected item. /VOL- button on the remote - BASS:-07,-06, ~, -01,00,+01,~, +06,+07 - TREBLE:-07,-06, ~, -01,00,+01,~, +06,+07 - BALANCE:L07,L06,~, L01, 00, R01,~,R06,R07 - FADER:R07,R06~,R01,00,F01,~,F06,F07 - EQ(Equalizer) Setting: OFF, FLAT, POP, ROCK, CLASS - Loudness: LOUD ON/OFF - DX/LOCAL: Enables or disables the local broadcast mode (LOCAL). - Stereo/Mono: Switches between MONO and STEREO reception mode for radio frequencies. - Volume level:00, 01,~,43 噝 Press and hold the SEL button on the front panel or press the SEL/ENTER button on the remote control to access the AREA US/EU frequency switch mode. - AREA US/EU: This car radio is equipped the USA / Europe frequency. Rotate the volume knob to switch between USA and Europe frequency. The system will change the frequency setting in about 3 seconds. 噝 Rotate the VOL knob on the front panel or press the VOL+ /VOLcontrol to adjust the selected item. button on the remote Set the Clock (CLK) 1. To display clock time, press the CLK button. 2. To set clock time, press and hold the CLK button and the hour will flash. 3. Press the or button on the front panel or on the remote control to adjust the hour. - 6 -