RCA DRC69702 DRC69702 Product Manual - Page 11

Connections C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only) The DVD player can play two channels Dolby Digital. Listening on External Audio Equipment 1. Connect the DVD player to the left/right Audio In jacks on the other equipment using a standard Audio cable (not included). 2. Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN function. DVD player right side Audio cable (not included) Stereo Receiver / Amplifier To Audio OUT jacks Note: • Make sure to use the correct Audio cable. Connecting the plugs incorrectly may cause a weak signal. • If you have a stereo VCR, make sure you set it to stereo mode. • Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system. D. Connecting Game Systems/Video Equipment (for the Monitor Only) You can connect game systems or other video equipment for playback using the monitor. Watching video equipment 1. Connect the other equipment to the monitor using a standard AV Cable (not included). 2. Turn on the monitor. 3. Turn on the video equipment and follow the instructions provided with it to playback. Note: • Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal. • If you have a mono VCR, the volume level from the speakers will be low. Monitor left side right side Game System / Video Equipment AV cable (not included) RCA DRC69702 IB.indd 7 To A/V IN jacks 7 11/25/2008 2:28:56 PM