RCA DRC99392 DRC99392 Product Manual - Page 7

Playing a Disc (Basic Playback) Repeat Playback • If no button is pressed within 10 seconds, playback continues 1/3 Sequence of angle shots (Example) without changing the 1/3 2/3 3/3 current angle. Note: This function can only be used for discs on which scenes shot from multiple angles have been recorded. Display Function While the disc is playing, press the DISPLAY button repeatedly to display information on operation status. 2. Press the REPEAT A-B button again at the end of the section (" AB " is displayed). 3. The unit will immediately begin replaying your selection. To Resume Normal Playback 4. While the disc is playing, press the REPEAT A-B button until the " AB OFF " indicator displays on the screen (the repeat indicator EN disappears from the screen for a CD). The system will return to normal playback. Notes: • Some discs may not permit A-B repeat operation. • You cannot set the A-B repeat function for a segment that includes multiple camera angles. • You can specify a segment only within the current title or track. • There may be a slight difference between point A and the location where playback actually resumes depending on the disc. Locating a Desired Section Adjust the LCD Screen You can adjust Brightness, Screen Size and Contrast of the LCD screen. 1. Press the VIDEO MODE button. 2. Press the / button to select Brightness, Screen Size or Contrast. 3. Press the / button to change the setting. 4. Press the VIDEO MODE button to exit the menu. Repeat Playback You can play a specific DVD title or chapter repeatedly (title repeat, chapter repeat, A-B repeat). Repeating a Chapter 1. While the DVD is playing, press the REPEAT DISC button until the " Chapter " indicator displays on the screen. The current chapter is played repeatedly. Repeating a Title 2. While the DVD is playing, press the REPEAT DISC button until the " Title " indicator displays on the screen. The current title is played repeatedly. To Resume Normal Playback 3. While the DVD is playing, press the REPEAT DISC button until the " Repeat Off " indicator displays on the screen. You can play a single CD track or the whole disc repeatedly. Repeating a Single Track 1. While the CD is playing, press the REPEAT DISC button until the " Track " indicator displays on the screen. The current track is played repeatedly. Repeating the Whole Disc 2. While the CD is playing, press the REPEAT DISC button until the " All " indicator displays on the screen. The whole disc is played repeatedly. To Resume Normal Playback 3. While the CD is playing, press the REPEAT DISC button until the " Repeat Off " indicator displays on the screen. Repeating a Specific Section You can play a specific section repeatedly. 1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (" A " is displayed) you want to play repeatedly. Locating a Specific Chapter / Title If you know the chapter/title number for the chapter/title that you want to play, you can locate it by directly selecting that number. 1. Press the GOTO button. Title 01/03 Chapter 03/12 / Title 01/03 Chapter 00/00 2. Press the / button to highlight chapter/title number, then press the corresponding number buttons (2 digits) for the chapter/title you want (for example: 02, 08, 10 or 15). If you press only 1 numeric button, press the ENTER button to confirm. 3. Playback starts from the selected chapter/title. Notes: • If the chapter/title number entered is not permitted by the DVD, " Input invalid " will display. Repeat steps 1 and 2 to re-enter the correct number. • Some discs may not respond to this process. • This method of locating a chapter/title is available only on a DVD that contains chapter/title numbers. Locating a Specific Time You can move to a specific location by entering its corresponding time (hours, minutes, seconds). 1. Press the GOTO button two times. Title 01/03 Time : : 2. Press the corresponding number buttons (5 digits: X:XX:XX, for example: 0 30 05, 1 08 23, 1 22 56) for the setting point you want. 3. Playback starts from the selected section. Notes: • If the time entered is not permitted by the DVD, " Input invalid " will display. You should re-enter the correct time. • Some discs may not respond to this process. • Some scenes may not be located as precisely as you specified. • This method for accessing specific locations is available only within the current title of the DVD. Programmable Memory You can combine your favorite titles/chapters/tracks and play them in the order you determine. 1. Press the MEMORY button while a disc is playing. The following display appears. Clear: Delete all input programs. Exit: Exit memory menu and return to normal playback. Start: Start memory playback. Next / Prev: Move to the next / previous setup page. 7 RCA DRC99392_Eng & Spa IB_MTK A5_17-3-2011.indd 7 3/28/2011 10:31:04 AM