RCA RDW3208 English Manual - Page 16

Cleaning the Spray Arms The spray ar ms can be eas ily remov ed for periodic cleaning of t he nozzles, to prevent possible cl oggi ng. Wash them under running water and ca refully replace them in t heir seats, checkin g that their rotary movement is in no way impede d. Grasp the middle of the spray arm, pull it upwards to remove it. Wash the a rms under a jet of running water and return them carefully to their seat. After reas sembly, c heck that the s pray arms turn freely. O therwise, che ck that th ey have been ins talled correctly. After Every Wash After every wash, turn off the water supply to the appliance and leave the door slightly open so that moisture and odors are not trapped inside. Remove the Plug Before cleaning or performing maintenance, always remove the plug from the socket. No Solvents or Abrasive Cleaning To clean the exte rior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Only use a cloth with warm soapy water. To remove spots o r stains from the surface of t he interior, use a cloth dampened with water with a little vinegar, or a cleaning product made specifically for d i s h wa s h e rs . When it is not in need for a long time It is recommend that you run a wash cycle with the dishwasher empty and then remove the plu g from the soc ket, t urn off the water supply and leave the door of the appliance slightly o pen. This will help the do or seals to ast longer and prevent o dours from forming within the applianc e. Moving the Appliance If the appli ance must be moved, try to keep it in the vertic al pos ition . If absolutely necessary, it can be positioned on its back. Se al s O ne of the factors th at cause odors to form in the dishwashe r is f ood that remai ns trapped in the seals. Periodic cleaning with a damp sponge w ill prevent this f rom occurring. The installation of the pipes and electrical equipments should be done by professionals. Electrical Shock Hazard Disconnect electrical power before installing dishwasher. Failure to do so can result in death or electrical shock. The installation position of dishwasher should be near the existing inlet and drain hoses and power cord. One side of the cabinet sink should be chosen to facilitate the connection of drain hoses of the dishwasher. 13