RCA RDW3208 English Manual - Page 21
If there is water in the base pan because of an overfill or small leak
View all RCA RDW3208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Uns a tis -factory w as h i ng result Uns a tis -factory drying result The dishes were not loaded correctly. The programme was not powerful enough. Not enough detergent was dispensed. Item are blocking the path of spray arms. The filter combination in the base of wash cabinet is not clean or is not correctly fitted. This may cause the spray arm jets to get blocked. Combination of soft water and too much detergent. Aluminum utensils have rubbed against dishes. Dishes block detergent cups. Improper loading Too little rinse-aid Dishes are removed too soon. Wrong programme selection Using cutlery with a low-quality coating See notes in " Loading the Dishwasher Baskets ". Select a more intensive programme. See" Wash Cycle Table ". Use more detergent, or change your detergent. Rearrange the items so that the spray can rotate freely. Clean and/or fit the filter combination correctly. Clean the spray arm jets. See "Cleaning the Spray Arms". Use less detergent if you have soft water and select a shortest cycle to wash the glassware and to get them clean. Use a mild abrasive cleaner to eliminate those marks. Re-loading the dishes properly. Load the dishwasher as suggested in the directions. Increase the amount of rinse-aid/Refill the rinse-aid dispenser. Do not empty your dishwasher immediately after washing. Open the door slightly so that the steam can escape. Begin unloading the dishwasher only once t he dishes are barely warm to the touch. Empty the low basket first. This prevents water form dropping off dishes in the upper basket. In short programmes the washing temperature is lower. This also lowers cleaning performance. Choose a programme with a long washing time. Water drainage is more difficult with these items. Cutlery or dishes of this type are not suitable for washing in the dishwasher. When some malfunctions come on, the appliance will display error codes to warn you: Longer inlet time. Overflow. Faucets is not opened, or water intake is restricted, or water pressure is too low. Some element of dishwasher leaks . If overflow occurs, turn off the main water supply before calling a service. If there is water in the base pan because of an overfill or small leak, the water should be removed before restarting the dishwasher. 18