RCA RTB1100 RTB1100 Product Manual - Page 21

The Setup Menu System Setting 1. In the main menu of Settings, press button, then use or button to select System. Settings Audio Language System Network System Optical Disc AutoPlay BD-Live Internet Access BD-Live Storage Erase Blu-ray Storage Update Via Network Restore factory defaults On Always Allow Access internal USB (0.0 KB Free) Required Storage: 48 MB Restore factory settings and deactivate Display 2. Press button and press or button to select an option, then press OK button. 3. Press or buttons to select the desired option, and then press OK button to confirm your selection. 4. Press or EXIT button to go to the previous menu. Optical Disc AutoPlay If On is selected, it will load data and play back automatically when you insert a Blu-ray disc. When Off is selected and if you insert a Blu-ray disc, the disc you can select will be displayed on the Settings menu. BD-Live Internet Access • Limit Access - Allows Internet access with valid "BDLive" network access approval. • Always Allow Access - Always allows BD-Live Internet access. • Prohibit Access - Never allows BD-Live Internet access. BD-Live Storage The available storage space is displayed next to BD-Live Storage. Erase Blu-ray Storage If you choose OK to erase Blu-ray storage, all bookmarks and BD-Live content saved in memory are deleted. Update Via Network This option displays the required storage space if the BD player is connected to internet for upgrade. Restore factory defaults If you choose OK in the prompt message box, all settings will be restored to the factory defaults. Network Setting 1. In the main menu of Settings, press button, then use or button to select Network. 2. Press button. Settings Language System Network Display Audio Wired Network Test 3. Press or button to select Wired, then press OK button. The IP Settings screen appears. If the network connection is active, Link Up appears next to Link Status. If the network connection is not active, Link Down displays next to Link Status. IP Settings Link Status Link Down MAC Address xx:xx:xx:xx:xx:xx IP Mode Dynamic IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway 0.0.0.0 Primary DNS 0.0.0.0 Secondary DNS 0.0.0.0 Apply Cancel 4. Press or button to select IP Mode, then press OK button. 5. Press or button to select an IP Mode. You can select: • Dynamic - Uses DHCP to automatically obtain an IP address. • Manual - Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings. • Off - Disables the network interface. -20- English IB(A5).indd 22 4/15/2010 20:19:13