Radio Shack pro 95 User Guide - Page 28

Ô NOTE Ô • If you made a mistake in Step 3, Invalid Freq briefly appears and the scanner beeps when you press ENTER. Start again from Step 3. • Your scanner automatically rounds the entered frequency to the nearest valid frequency. For example, if you enter a frequency of 151.553, your scanner accepts it as 151.550. • After a transmission, to have the scanner pause for 2 seconds on this channel before proceeding to the next active transmission, press ./DELAY to turn the delay function on. See "Using the Delay Function" on Page 45. The scanner stores this setting in the channel. quency (including the decimal point) you want to store. If you make a mistake, press CL to delete a single digit or press and hold CL about 2 seconds to delete all digits. 4. Press ENTER to store the frequency into the channel. Ô 5. If necessary, press MODE to change the receiving mode. 6. If desired, program a text tag for the channel (see "Assigning a Text Tag to a Channel" on Page 29). 7. The next channel in sequence is ready for programming. Press PGM and then repeat steps 3 through 6. STORING TRUNKING FREQUENCIES INTO CHANNELS 1. Press PGM and FUNC then  or  to select the desired bank to program. 2. Press TRUNK to enter into trunking mode. 3. Repeatedly press MODE to select MOT (Motorola) or ED (EDACS). 4. Press PGM and select the channel number using  or . 5. Enter the UHF trunking frequency and press ENTER. Operation 28