Radio Shack pro 95 User Guide - Page 43
Copying a Frequency into, the Priority Channel
UPC - 040293166847
View all Radio Shack pro 95 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
copied on the channel. After about 2 seconds, the scanner automatically returns to search mode. 3. If you try to copy a frequency which is already stored, the scanner sounds the notice tone 3 times after you press ENTER. Dupl.f Chxxx appears at the bottom line. If you want to copy the duplicate frequency anyway, press ENTER, or if not, press CL to cancel. Copying a Frequency into the Priority Channel You can copy a frequency into the priority channel (see "Priority" on Page 47) when the scanner stops on the frequency during Search, Scan, Manual, Tune, or WX mode. Ô NOTE Ô • You must store frequencies into channels before the scanner can scan them. The scanner does not scan through empty channels. • To change the scanning direction, press or . Press FUNC then PRI when the frequency is on the display. The display flashes twice and the frequency is copied to the priority channel. SCANNING THE CHANNELS To begin scanning channels or to start scanning again after monitoring a specific channel, press SCAN. Ô The scanner scans through all channels (except those you have locked out) in the active banks (see "Turning Channel-Storage Banks Off and On" on Page 44 and "Locking Out Channels or Frequencies" on Page 45). Operation 43