Radio Shack pro 95 User Guide - Page 64

Trunking Ô NOTE Ô • If you made a mistake in Step 4, Invalid ID. appears and the scanner beeps when you press ENTER. Start again at Step 3. • You can enter either decimal or AFS code for ED (EDACS) ID. The default setting is decimal ID entry. When you press FUNC then 2, AFS format appears for about 2 seconds. Now you can enter the ID code with AFS format. 8. If you want to tag the ID, press TEXT, enter the desired text tag for the ID. Then press ENTER (see "Text Input Chart" on Page 31). 9. To store the next ID memory in sequence, press  and repeat Step 4. Bank 0-0 ON ID No. 01 Next location MOT: none 10. Press SCAN to start scanning. Ô If you entered an ID code that is already stored in another ID channel, Dupl ID appears. If you want to store the ID code, press ENTER. To cancel the operation, press CL. Bank 0-0 ON ID No. 00 MOT: 02992 Dupl ID 1-12 Duplication TALK GROUP ID HOLD You can set your scanner to follow a trunking signal that you want to track during scanning. While the scanner is stopped on a voice channel (VC appears), hold down TRUNK until ID hold ON. appears. When ID hold is activated and the scanner receives a voice channel, 64