Radio Shack pro 95 User Guide - Page 48

Special Features Ô NOTE Ô • The priority feature does not operate while the scanner receives a trunking voice channel or during trunking delay time. Therefore, the priority check seems random during peak hours. • If you program a weather channel as the priority channel, the scanner stays in the priority channel only when the scanner detects the weather alert tone • This scanner cannot set a channel as the priority channel if the channel's receive mode is MOT or ED. the scanner has one priority channel. With the priority feature, you can scan through programmed channels and still not miss an important or interesting transmission on a specific channel. When priority is turned on, the scanner checks that channel every 2 seconds, and stays on the channel if there is activity until the activity stops. Ô To program a frequency in the priority channel: 1. Press MANUAL. 2. Use the number keys to enter the channel number which contains the frequency you want to program as the priority channel. Then press MANUAL again. 3. Press FUNC then PRI. Pri Channel blinks on the bottom line. To program the priority channel directly: 1. Press PGM. 2. Press PRI. 3. Enter the frequency you want to enter into the priority channel, then press ENTER. To program a weather channel as the priority channel: 1. Press WX. 48