Rane SL3 SL3 Owners Manual for Scratch Live 2.5.0 - Page 39
Tonearm Is Slightly Too Light
View all Rane SL3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
RECORD BURN - This section of the control vinyl has been worn. Swap sides or use the track start offset. LEFT CHANNEL MISSING - The signal from the needle is not reaching the SL3. Check the cable and cartridge wiring. RIGHT CHANNEL MISSING - The signal from the needle is not reaching the SL3. Check the cable and cartridge wiring. BAD RECORD BURN - Your record is badly worn and Scratch Live is unable to track. Swap sides or get new vinyl ASAP. LEFT CHANNEL IS NOISE - Left signal has been lost with a noisy loose connection. RIGHT CHANNEL IS NOISE - Right signal has been lost with a noisy loose connection. TONEARM IS SLIGHTLY TOO LIGHT Susceptible to dust and vibration. Adjust the tonearm. SIGNALS ARE SUMMING TO MONO Left and right signals have been combined into one somewhere in your signal chain. RIGHT CHANNEL IS INTERFERENCE Right signal is lost with a noisy loose connection and left channel crosstalk. RANE SL3 FOR SERATO SCRATCH LIVE • OPERATOR'S MANUAL 2.5.0 39