Reebok Rel 8 Elliptical English Manual - Page 19

Maintenance And Troubleshooting

Page 19 highlights

MAINTENANCE AND TROUBLESHOOTING For smooth operation of the elliptical crosstrainer, the incline ramp should be Incline Ramp kept clean. Using a soft Wheel cloth and mild detergent, clean dust and other residue from the incline ramp where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this manner. Never use abrasives or solvents. Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately. CALIBRATING THE RESISTANCE AND INCLINE SYSTEMS If the elliptical crosstrainer's resistance or incline system is not working properly, you may need to activate the calibration process. To activate the resistance calibration process, press the lowest RESISTANCE button. Wait for the resistance motor to stop. Next, press the highest RESISTANCE button. While the resistance motor is running, unplug the power cord from the wall. Wait for a few seconds and then plug the power cord back in. The resistance system will now calibrate itself. It will not need to be calibrated again. To activate the incline calibration process, press the lowest INCLINE button. Wait for the incline motor to stop. Next, press the highest INCLINE button. While the incline motor is running, unplug the power cord. Wait for a few seconds and then plug the power cord back in. The incline system will now calibrate itself. It will not need to be calibrated again. 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

19
For smooth
operation of
the elliptical
crosstrainer,
the incline
ramp should be
kept clean.
Using a soft
cloth and mild
detergent,
clean dust and
other residue
from the incline
ramp where the wheels make contact with it. Other
parts of the elliptical crosstrainer can also be cleaned
in this manner.
Never use abrasives or solvents.
Inspect and tighten all parts of the elliptical crosstrainer
regularly. Replace any worn parts immediately.
CALIBRATING THE RESISTANCE AND INCLINE
SYSTEMS
If the elliptical crosstrainer’s resistance or incline sys-
tem is not working properly, you may need to activate
the calibration process.
To activate the resistance calibration process,
press the lowest RESISTANCE button. Wait for the
resistance motor to stop. Next, press the highest
RESISTANCE button. While the resistance motor is
running, unplug the power cord from the wall. Wait for
a few seconds and then plug the power cord back in.
The resistance system will now calibrate itself. It will
not need to be calibrated again.
To activate the incline calibration process,
press
the lowest INCLINE button. Wait for the incline motor
to stop. Next, press the highest INCLINE button.
While the incline motor is running, unplug the power
cord. Wait for a few seconds and then plug the power
cord back in. The incline system will now calibrate
itself. It will not need to be calibrated again.
MAINTENANCE AND TROUBLESHOOTING
Incline
Ramp
Wheel