Ricoh 8100DN Hardware Guide - Page 50
Fully insert the Gigabit ethernet board into the slot., screwdriver
UPC - 026649025952
View all Ricoh 8100DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Attaching Gigabit Ethernet Board C Disconnect the cables from the ethernet port and the USB port of the print- er, and cover each port with its protective cap. 2 AQV562S D Remove the screw by turning it counterclockwise using the provided screwdriver, and then remove the cover of the Gigabit ethernet board slot. AQV509S The removed cover is not used when installing the interface unit. E Fully insert the Gigabit ethernet board into the slot. AQV514S 39
Attaching Gigabit Ethernet Board
39
2
C
Disconnect the cables from the ethernet port and the USB port of the print-
er, and cover each port with its protective cap.
D
Remove the screw by turning it counterclockwise using the provided
screwdriver, and then remove the cover of the Gigabit ethernet board slot.
The removed cover is not used when installing the interface unit.
E
Fully insert the Gigabit ethernet board into the slot.
AQV562S
AQV509S
AQV514S