Ricoh 8100DN Hardware Guide - Page 75

Paper and Other Media Feed Direction Size (mm) Bypass Tray Tray 1/2 Paper Feed Unit (Tray 3 /4) Large Capacity Tray Duplex Printing Legal (LG, 81/2 × 14 inches) L 216 × 356 Letter (LT, 81/2 × 11 inches) L 216 × 279 Letter (LT, 11 × 81/2 inches) K 279 × 216 51/2 × 81/2 inches L 140 × 216 Executive (Exec., 71/4 × 101/2 L 184 × 276 inches) 5 Executive (Exec., 101/2 × K 276 × 184 71/4inches) F/GL (8 × 13 inches) L 203 × 330 Foolscap (F4, 81/2 × 13 inches) L Folio (81/4 × 13 inches) L Custom Size - 216 × 330 210 × 330 - • The size is supported and the printer selects it automatically. In the "Duplex" column, this means duplex printing is possible. • The size is supported, but the following setting is required: • Set the dial of the paper tray to "p". • Select the paper size using the control panel. • The size is supported, but it should be set as a custom size using the control panel. The supported size may differ depending on the printer language you use. Set as a custom size setting using the control panel. Tray 1/2 or the Paper Feed Unit (Tray 3/4) do not support custom size. The following sizes are supported: • Bypass Tray: approximately 100 - 297 mm in width, and 148 - 600 mm in length. • The size is not supported. 64