Ricoh AP610i Setup Guide - Page 49
Interface Cable 6 pins x 4 pins, Interface Cable 6 pins x 6 pins
UPC - 026649024917
View all Ricoh AP610i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing Options ❖ 1394 Interface Cable (6 pins x 4 pins) ❖ 1394 Interface Cable (6 pins x 6 pins) B Turn off the power of the printer, and then unplug the printer's power ca- ble and the interface cable. C If the duplex unit is attached, push down the lever on right side ( ) and pull out the duplex Unit until it stops ( ). If the duplex unit is not attached, go to the following steps. D Remove the two screws holding the controller board in place. ❒ Use a coin or similar object if the screws do not turn easily. 49
Installing Options
49
❖
1394 Interface Cable (6 pins x 4 pins)
❖
1394 Interface Cable (6 pins x 6 pins)
B
Turn off the power of the printer, and then unplug the printer's power ca-
ble and the interface cable.
C
If the duplex unit is attached, push down the lever on right side (
) and
pull out the duplex Unit until it stops (
).
If the duplex unit is not attached, go to the following steps.
D
Remove the two screws holding the controller board in place.
❒
Use a coin or similar object if the screws do not turn easily.