Ricoh AP610i Setup Guide - Page 88
WEP Setting, Not Active, Change WEP Key, Yes HEX, WEP Key
UPC - 026649024917
View all Ricoh AP610i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Configuration O After entering the key, press the {# Enter} key twice. SSID: [32] AAAAAAAAAAAAAAAA After the settings are made, about two seconds later, the screen returns to the IEEE 802.11b setting menu. P In the case of using a WEP key on a network, activate the WEP setting to be used for communication along with WEP. ❒ Confirm the network administrator for the WEP Key to use. ❒ WEP key can also be set using a Web browser. For details, see Web Im- age Monitor Help. Q Press the {U} or {T} key to display [WEP Setting], and then press the {# Enter} key. The following message appears on the display. WEP Setting: *Not Active R Press the {U} or {T} key to display [Active], and then press the {# Enter} key. The following message appears on the display. Change WEP Key: Yes (HEX) ❒ When setting the WEP Setting to [Active], you will need to enter the WEP key. If you have not entered the key, be sure to enter it. ❒ If you have entered the WEP key and change the setting, press the {U} or {T} key to display [No], and then press the {# Enter} key. S Press the {U} or {T} key to display [Yes (HEX)] when inputting a hexadec- imal WEP key or [Yes (ASCII)] when inputting an ASCII WEP key. Then press the {# Enter} key. WEP Key: k [ 0] The value in brackets at the upper right is the number of characters entered. 88