Ricoh Aficio SP 5210SF Network Guide - Page 82
Checking the signal, the Ad-hoc Channel, see Interface Settings .
View all Ricoh Aficio SP 5210SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
2. Connecting the Machine Select the communication mode 802.11 Ad-hoc Mode 2 Set the SSID Select ad-hoc channel Select Security Type Enable/Disable Encryption (WEP/WPA) Select the communication mode Infrastructure Mode Set the SSID Select Security Type Enable/Disable Encryption (WEP/WPA) Confirm the connection Confirm the connection BZU020 • Select [802.11 Ad-hoc Mode] when connecting Windows XP as a wireless LAN client using Windows XP standard driver or utilities, or when not using the infrastructure mode. • When [802.11 Ad-hoc Mode] is selected in Communication Mode, select the channel for [Ad-hoc Channel]. Set a channel that matches the type of wireless LAN being used. For details about setting the Ad-hoc Channel, see "Interface Settings ". • You can specify either "WEP" or "WPA" to the Security Method. • Specify "WPA", when [Communication Mode] is set to [Infrastructure Mode]. • If you select the [WPA] option for Security Method, select one of the following: [WPA-PSK], [WPA], [WPA2-PSK], or [WPA2]. If you select [WPA-PSK] or [WPA2-PSK], enter your PSK. If you select [WPA] or [WPA2], authentication settings and certificate installation settings are required. For details about setting methods, see "Configuring IEEE 802.1X". • For details about how to specify wireless LAN settings from the control panel on the machine, see "Interface Settings". • p.36 "Interface Settings" • p.313 "Configuring IEEE 802.1X" Checking the signal This section describes how to check the machine's radio wave status. 80