Ricoh Aficio SP C232SF User Guide - Page 321
Maintenance, Cleaning, Cautions to Take When Cleaning, Cleaning the Toner Density Sensor
View all Ricoh Aficio SP C232SF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
10. Maintenance This chapter describes how to maintain the machine. Cleaning Cautions to Take When Cleaning R WARNING: • Do not attempt any maintenance or troubleshooting other than that mentioned in this manual. This machine contains a laser beam generator and direct exposure to laser beams can cause permanent eye damage. R CAUTION: • The inside of this machine becomes very hot. Do not touch parts labelled "v" (indicating a hot surface). • Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard. Clean the machine periodically to maintain high print quality. Dry wipe the exterior with a soft cloth. If dry wiping is not enough, wipe with a soft, damp cloth that is wrung out well. If you still cannot remove the stain or grime, use a neutral detergent, wipe over the area with a well-wrung damp cloth, and then dry wipe the area and allow it to dry. Important ❒ To avoid deformation, discoloration, or cracking, do not use volatile chemi- cals, such as benzine and thinner, or spray insecticide on the machine. ❒ If there is dust or grime inside the machine, wipe with a clean, dry cloth. ❒ You must disconnect the plug from the wall outlet at least once a year. Clean away any dust and grime from the plug and outlet before reconnecting. Accumulated dust and grime pose a fire hazard. ❒ Do not allow paper clips, staples, or other small objects to fall inside the machine. Cleaning the Toner Density Sensor Clean the machine when the error message instructing you to do so appears. This procedure explains how to clean the toner density sensor of the yellow print cartridge as an example of how to clean a sensor. 311