Ricoh Aficio SP W2470 Software Guide - Page 242
ifconfig, View settings, IPv4 Configuration, Netmask configuration, Broadcast address configuration
View all Ricoh Aficio SP W2470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 242 highlights
Monitoring and Configuring the Printer ifconfig Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address, default gateway address) for the printer. ❖ View settings msh> ifconfig ❖ IPv4 Configuration msh> ifconfig "interface_name" "parameter" "address" • If you did not enter an interface name, it is automatically set to the Ethernet interface. • wlan can be specified only when the IEEE 802.11b interface unit is installed. Interface name Interface configured ether Ethernet interface wlan IEEE 802.11b Interface 6 The following explains how to configure an IPv4 address 192.168.15.16 on Ethernet interface. msh> ifconfig ether 192.168.15.16 ❖ IPv6 Configuration msh> ifconfig ether inet6 "interface_name" "prefixlen" The following explains how to configure a IPv6 address to 2001:DB8::100 with prefix length 64 on the Ethernet interface. msh> ifconfig ether inet6 2001:DB8::100 64 ❖ Netmask configuration msh> ifconfig "interface_name" netmask "address" The following explains how to configure a subnet mask 255.255.255.0 on Ethernet interface. msh> ifconfig ether netmask 255.255.255.0 ❖ Broadcast address configuration msh> ifconfig "interface_name" broadcast "address" ❖ Changing the Interface msh> ifconfig "interface" up You can specify either the Ethernet interface or IEEE 802.11b interface when using the optional IEEE 802.11b interface unit is installed. 228