Ricoh FW770 Operating Instructions - Page 44

Displays and Keys WHERE IS IT & WHAT IS IT Ref. What it is What it does Set Paper and 6 RF Select indicators These usually light up together. They light when you can set paper on the table or select and start the roll feeder. If you don't have the roll feeder option, the RF Select indicator will not light. Wait indicator Shows that the copier is not yet ready to copy. Clear Modes/Stand-by Returns the copier to the default settings. Press and hold 7 key 3 sec. to let the fusing unit cool down. This saves energy, but increases the waiting time at the next copy job. 8 Program key Allows you to recall or set a program. Function Select key Lets you switch your input from, the lead margin, the copy 9 counter, or the paper length. (See 1.) Also used for copying a selected portion of the original. Paper Length 10 indicator & Copy Counter 1) Shows the length of paper the roll feeder will send. 2) Shows the number of copies to make. 3) Displays FULL when the used toner bottle needs to be emptied. 11 Preset Cut key Scrolls through the preset paper lengths for the roll feeder. 12 RF Select key Selects the roll feeder as the source of copy paper. Copy Media key Tells the copier what kind of copy paper you are using. The copier will apply more or less heat accordingly. 13 Vellum and Film Shows when vellum is the selected copy media. Shows when film is the selected copy media. indicators When both indicators are off, the copier is set for plain copier paper. 14 Emergency Stop Pressing this key will stop the copying process immediately. Use if your original is getting stuck in the copier. Density indicator 15 Darker key Shows the density level the copies will have. The Darker key will increase the density. Lighter key The Lighter key will decrease the density. 16 Clear Stop key Tells the copier to stop copying and clear the copier. (The copier will finish the copy, feed out the original, and stop.) 39