Ricoh FW770 Operating Instructions - Page 46

The Outside Of The Copier WHERE IS IT & WHAT IS IT Ref. What it is 1, 1a Locks 2 Front cover 3 Original table Holder for the 4 operating instructions 5 Copy exit guide 6 Operation panel 7 Rear table 8 Roll feeder (option) 9, 9a Guides (option) 10 Copy table 11 Original exit 12 Roll feeder covers 13 Copier table (option) 14 Main switch What it does Squeeze both locks to open the unit. Open the unit to empty the used toner bottle and to remove jammed paper. Open this cover (and the unit) to access the toner cartridge. Place your original here, face up. If you want to copy a stiff original that can't be bent, use the rear table (see 7). Place this booklet here when you're not reading it.* Makes sure the copies don't fall off as they come out. See page 38. 1) Place stiff originals here, face down. 2) Open to remove jammed paper from fusing unit. Feeds paper from a roll to the copier. Use the guides to keep the original and copy paper going straight as you feed them into the copier. Open this table if you are copying to sheets, changing the toner cartridge, or if you have to open the unit. The original will come out from here after it is copied. Open these covers to change the roll of paper and to clear paper jams. Holds your copier and roll feeder. Turn on to start the copier and off when you're done for the day. The copier will need about 5 minutes to warm up if it's been turned off for a long time. *Please! 41