Ricoh IM 430Fb User Guide - Page 27
Obtaining an IP address automatically IPv4 DHCP, Specifying an IP address IPv4
View all Ricoh IM 430Fb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Connecting and Setting the Network 12. Press [SSID Setting]. 13. Press [Enter SSID] and enter the SSID for the access point you want to connect to, and then press [OK]. 14. Press [OK]. 15. Press [Security Method]. 16. Enter the security method that is specified for the access point you want to connect to. Press [WEP] or [WPA2], and then press [Enter] on the screen to enter your password. If you do not use security setting, select [No]. 17. Press [OK]. The settings are complete. To check the connection status, press [Wireless LAN Signal] in [Wireless LAN] in [Interface Settings] in [System Settings] and confirm the signal status. Obtaining an IP address automatically (IPv4 DHCP) The machine is set to obtain IP addresses automatically as a factory default. 1. Press [Home] ( ) at the bottom of the screen in the center. 2. Flick the screen to the left, and then press the [User Tools] icon ( ). 3. Press [Machine Features]. 4. Press [System Settings]. 5. Press [Interface Settings] tab. 6. Press [Network]. 7. Press [Machine IPv4 Address]. 8. Press [Auto-Obtain (DHCP)]. 9. Press [OK]. Specifying an IP address (IPv4) 1. Press [Home] ( ) at the bottom of the screen in the center. 2. Flick the screen to the left, and then press the [User Tools] icon ( ). 25