Ricoh IM 430Fb User Guide - Page 52
Installing the Extended USB board
View all Ricoh IM 430Fb manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
1. Getting Started Installing the Extended USB board • Before beginning work, ground yourself by touching something metal to discharge any static electricity. Static electricity can damage the interface units. • Do not subject the Extended USB board to physical shocks. 1. Check the contents of the package. 2. Turn the machine off and unplug the power cord. 3. Loosen the two screws and remove the slot cover. DVL370 The removed cover will not be reused. 4. Fully insert the interface board. DVL377 Check that the interface board is firmly connected to the controller board. 5. Tighten the two screws to secure the interface board. 6. Plug in the power cord, and then turn on the machine. 7. Print the configuration page to confirm that the board was attached correctly. See page 30 "Connecting the USB Interface" to connect with USB interface. 50