Ricoh MP C5503 Manuals - Page 142
Loading Paper into the Bypass Tray
View all Ricoh MP C5503 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
9. Adding Paper and Toner Loading Paper into the Bypass Tray Use the bypass tray to use OHP transparencies, adhesive labels, translucent paper, and paper that cannot be loaded in the paper trays. • The maximum number of sheets you can load at the same time depends on paper type. Do not stack paper over the limit mark. For the maximum number of sheets you can load, see page 144 "Recommended Paper Sizes and Types". 1. Open the bypass tray. CVA015 2. Load the paper face down until you hear the beep. 3. Align the paper guides to the paper size. If the guides are not flush against the paper, images might be skewed or paper misfeeds might occur. When loading paper into the bypass tray of a Type 5 machine, align the paper guides to the paper, and then the machine will automatically make fine adjustments to the position of the side fences so that they exactly align with the size of the paper you loaded. CVA016 • When you use the bypass tray, it is recommended to load the paper in orientation. 132