Ricoh P C301W Setup Guide - Page 10

4. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. Network Wizard 44 IPv4 Configuration IPv6 Configuration Quit Setup ECB240 5. Press the [Menu] key. 12. Execute WPS (PIN system) from the router (access point)'s web page. ECB202 6. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. Settings Wi-Fi Setup Wizard Network Settings Print List/Report 68 ECB206 7. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key. Network Settings 1 5 Wired (Ethernet) Wireless (Wi-Fi) IPv4 Configuration ECB207 8. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key. Wireless (Wi-Fi) Current Connection Input SSID WPS 69 ECB215 9. Press the [ ] or [ ] key to select [PIN], and then press the [OK] key. WPS Type 22 PBC PIN DSG096 10. Check the PIN code. PIN PIN Code: XXXXXXXX Connect Abort ECB217 Write down the PIN code in case you might forget it. 11. Enter the machine's PIN code (8 digits) on the router (access point)'s web page (The web page accessed in Step 2). 13. Press the [ ] or [ ] key to select [Connect], and then press the [OK] key. PIN PIN Code: XXXXXXXX Connect Abort ECB217 "Please wait for 2 minutes" appears and connecting with PIN method starts. 14. Check the result. Connection has succeeded: PIN Connection to AP has Succeeded EXIT ECB229 •• Press the [OK] key to return to the screen displayed in Step 6, and then press the [Menu] key to return to the initial screen. Connection has failed: PIN Connection to AP has Failed EXIT ECB230 •• Press the [OK] key to return to the screen displayed in Step 6. Check the configuration for the router (access point), then try the connection again. 15. Configuring the Wi-Fi settings is complete. To use the printer driver, install the printer driver according to the procedure on page 10 "3. Installing the Printer Driver". 8