Ricoh P C301W Setup Guide - Page 9

Easy Setup Using the WPS Button ●● Make sure the Ethernet cable is not connected to the machine. ●● In Steps 10 to 12, configure each setting within two minutes. 10. After "Connecting..." appears, press the WPS button on the router (access point) within two minutes. WPS ●● The following item is necessary to set up a wireless connection. ●● Router (access point) 1. Check that the router (access point) is working correctly. 2. Press the [ ] or [ ] key to select [Wired (Ethernet)], and then the [OK] key. Network Wizard 12 Wired (Ethernet) Wireless (Wi-Fi) DYG081 3. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. Network Wizard 44 IPv4 Configuration IPv6 Configuration Quit Setup ECB240 4. Press the [Menu] key. ECB202 5. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. Settings Wi-Fi Setup Wizard Network Settings Print List/Report 68 ECB206 6. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key. Network Settings 1 5 Wired (Ethernet) Wireless (Wi-Fi) IPv4 Configuration ECB207 7. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key. Wireless (Wi-Fi) Current Connection Input SSID WPS 69 ECB215 8. Press the [ ] or [ ] key to select [PBC], and then press the [OK] key. WPS Type 12 PBC PIN DSG092 9. Press the [ ] or [ ] key to select [Yes], and then press the [OK] key. PBC WPS PBC Connect ? Yes No ECB216 CHV607 •• For details about how to use the WPS button, refer to the manuals for the router (access point). 11. Check the result. Connection has succeeded: PBC Connection to AP has Succeeded EXIT ECB227 •• Press the [OK] key to return to the screen displayed in Step 6, and then press the [Menu] key to return to the initial screen. Connection has failed: PBC Connection to AP has Failed EXIT ECB228 •• Press the [OK] key to return to the screen displayed in Step 6. Check the configuration for the router (access point), then try the connection again. 12. Configuring the Wi-Fi settings is complete. To use the printer driver, install the printer driver according to the procedure on page 10 "3. Installing the Printer Driver". Easy Setup Using a PIN Code ●● Make sure the Ethernet cable is not connected to the machine. ●● In Steps 11 to 13, configure each setting within two minutes. ●● To establish a connection using the PIN code, use a computer that is connected to the router (access point). ●● The following item is necessary to set up a wireless connection. ●● Router (access point) 1. Check that the router (access point) is working correctly. 2. Open the PIN code configuration window (web page) for the router (access point) on your computer. 3. Press the [ ] or [ ] key to select [Wired (Ethernet)], and then the [OK] key. Network Wizard 12 Wired (Ethernet) Wireless (Wi-Fi) DYG081 7