Ricoh P C301W Setup Guide - Page 8
Connecting to devices using the WPA2-PSK or, Mix Mode WPA2/WPA authentication
View all Ricoh P C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting to devices using the WPA2-PSK or Mix Mode WPA2/WPA authentication 5. Enter the encryption key using the [ ] or [ ] key, and then press the [OK] key. Password Key : (8-63 chars/64 hex) WPA2-PSK ECB225 As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64 hexadecimal digits (0-9, A-F, a-f). For details about checking the encryption key, see "Checking the SSID and Encryption key". 6. Press the [OK] key. Are you sure to connect? (OK/Back) ECB226 7. Check the result. Connection has succeeded: Connect succeed! DSG355 Connection has failed: Connect failed! DSG356 8. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. 9. Configuring the Wi-Fi settings is complete. To use the printer driver, install the printer driver according to the procedure on page 10 "3. Installing the Printer Driver". Connecting to the devices using the Open system or Shared Key authentication 5. Press the [ ] or [ ] key to select the encryption method, and then press the [OK] key. Encryption 15 None WEP 64 bit Hex WEP 64 bit ASCII ECB212 The maximum number of characters that can be entered in the encryption key field depends on the encryption method settings. ●● Do not select [None] except in special cirmunstances. If selected, the security system will not work. 6. Enter the encryption key using the [ ] or [ ] key, and then press the [OK] key. Password Key: (5 chars) Open system ECB213 For details about checking the encryption key, see "Checking the SSID and Encryption key". 7. Enter the ID using the [ ] or [ ] key, and then press the [OK] key. Password ID: 1 (Enter 1-4) ECB214 The ID is used for identifying the encryption key. You can register four encryption keys (ID 1 to 4). 8. Enter the password. 9. Press the [OK] key. Are you sure to connect? (OK/Back) ECB226 10. Check the result. Connection has succeeded: Connect succeed! DSG355 Connection has failed: Connect failed! DSG356 11. Press the [ ] or [ ] key to select [Quit Setup], and then the [OK] key. 12. Configuring the Wi-Fi settings is complete. To use the printer driver, install the printer driver according to the procedure on page 10 "3. Installing the Printer Driver". 6