Ricoh SP 204SFNw User Guide - Page 136
IPv6 Gateway Address, Stateless Address 0-4
View all Ricoh SP 204SFNw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
7. Configuring the Machine Using the Control Panel When DHCP is used, you cannot specify the IPv4 address, subnet mask, or default gateway address manually. Default: [On] • On • Off • IP Address Specifies the machine's IPv4 address when DHCP is not used. Use this menu to check the current IP address when DHCP is used. Default: 192.0.0.192 • Subnet Mask Specifies the machine's subnet mask when DHCP is not used. Use this menu to check the current subnet mask when DHCP is used. Default: 255.255.255.0 • Gateway Address Specifies the machine's default gateway address when DHCP is not used. Use this menu to check the current default gateway address when DHCP is used. Default: 192.0.0.192 Machine IPv6 Address You can configure the wireless LAN IP address. • Use IPv6 Select whether to enable or disable IPv6. Default: [On] • On • Off • Link-local Address Displays the IPv6 link local address. • Stateless Address 0-4 Displays the IPv6 stateless addresses obtained from a Router Advertisement. • Stateful Address Displays the IPv6 stateful address. • Manual Config. Add. Specifies the machine's IPv6 address when DHCP is not used. • IPv6 Gateway Address 134