Ricoh SP 204SFNw User Guide - Page 180
Error and Status Indicate on the Control Panel, Messages on the Screen
View all Ricoh SP 204SFNw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
10. Troubleshooting Error and Status Indicate on the Control Panel Messages on the Screen • If the "Service Call: SCXXX" appears, contact your sales or service representative. • Depending on the model you are using, some error messages may not appear. • If the "Engine Over Heat Please Wait" message appears, wait until the message disappears. If the message appears during printing, the machine stops and resumes printing after the message has disappeared. Message Tray 1 Out of Paper Bypass Tray Out of Paper Misfeed: Inner/ Outer Misfeed: ADF Open Cov. Rmv. Paper Set Correct Size Ppr Press Start to Print Cover Open Causes Tray 1 has run out of paper. Solutions Load paper into Tray 1. See page 35 "Loading Paper". The bypass tray has run out of paper. Load paper into the bypass tray. See page 35 "Loading Paper". A paper jam has occurred in the Remove the jammed paper. See page 162 machine. "Paper Feed Problems". An original has been jammed inside the ADF. • Remove jammed originals, and then place them again. See page 162 "Paper Feed Problems". • Check the originals are suitable for scanning. See page 44 "Placing Originals". The paper for printing fax is not loaded. • Press the [Start] key to begin printing, or press the [Stop/Clear] key to cancel the job. • Load the appropriate size paper. The front cover or fusing cover is Close the front cover or fusing cover open. completely. 178