Ridgid JP0610 Owners Manual - Page 17

ASSEMBLY ASSEMBLING JOINTER TABLE TO CABINET See Figures 15 - 16. WARNING: This tool is heavy. To avoid back injury, lift with your legs, not your back, and get help when needed. n With help place the bed assembly upside down on two blocks as shown. n Place the cabinet on top of the bed assembly as shown. n Locate the following: Serrated Hex Head Bolts (3), 3/8-16 x 3/4 in. n Line up the holes in jointer table with the holes in the cabinet. n Bolt the jointer table to the cabinet using hex head bolts and tighten all the bolts. To access third bolt, reach into dust collection port on left side. ASSEMBLING SWITCH See Figure 17. n Locate the following: Switch Key (1) Screws (2), 3/16 in. n Using 3/16 in. screws, mount the switch into place as shown. Make sure the switch is right side up. n Install switch key into switch. 4 X 4'S BED ASSEMBLY 4 X 4'S HEX HEAD BOLT BED ASSEMBLY 4 X 4'S SCREW JOINTER CABINET 4 X 4'S Fig. 16 SWITCH Fig. 15 Fig. 17 17