Ridgid JP0610 Owners Manual - Page 4

GENERAL SAFETY RULES n INSPECT EXTENSION CORDS PERIODICALLY and replace if damaged. n KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND GREASE. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents to clean tool. n STAY ALERT AND EXERCISE CONTROL. Watch what you are doing and use common sense. Do not operate tool when you are tired. Do not rush. n DO NOT USE TOOL IF SWITCH DOES NOT TURN IT ON AND OFF. Have defective switches replaced by an authorized service center. n INSPECT FOR AND REMOVE ALL NAILS FROM LUMBER BEFORE USING THIS TOOL. Following this rule will reduce the risk of serious personal injury. n NEVER START A TOOL WHEN ANY ROTATING COMPONENT IS IN CONTACT WITH THE WORKPIECE. n DO NOT OPERATE A TOOL WHILE UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR ANY MEDICATION. n WHEN SERVICING use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. n USE ONLY RECOMMENDED ACCESSORIES listed in this manual or addendums. Use of accessories that are not listed may cause the risk of personal injury. Instructions for safe use of accessories are included with the accessory. n DOUBLE CHECK ALL SETUPS. Make sure the spindle or sanding belt assembly is tight and not making contact with sander or workpiece before connecting to power supply. 4