Ryobi A18MS01G Operation Manual - Page 2
Rules For Safe Operation, Table Of Contents - miter saw stand
View all Ryobi A18MS01G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
TABLE OF CONTENTS Rules for Safe Operation...2 Symbols...3 Features...4 Assembly...5-8 Operation...9 Maintenance...10 RULES FOR SAFE OPERATION Safe operation of this accessory requires that you read and understand this operator's manual, the operator's manual for the table saw and all labels affixed to the tool. READ ALL INSTRUCTIONS Know your accessory. Read the operator's manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this accessory. Keep the work area clean. Cluttered work areas and work benches invite accidents. Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. This stand will accommodate many miter saws. However, it should never be used on any miter saw with a blade diameter larger than 12 in. or with any slide miter saw with a blade diameter larger than 10 in. other than 12 in. Ryobi brands. Always confirm any miter saw used is mounted securely and is stable before plugging in the miter saw. Before turning on the saw, perform a dry run of the cutting operation just to make sure that no problems will occur when the cut is made. Do not modify or use this stand for any purpose for which it is not intended. This stand is designed to be used on a flat stable surface. Do not use the stand on an uneven surface. Be sure to allow enough room to handle and properly support the workpiece. Follow the tool mounting instructions carefully, and ensure the tool is fastened securely. Maximum weight of the miter saw and workpiece together must not exceed 400 pounds. Do not apply an unbalanced load that could cause the miter saw stand to tip over. Save these instructions. Refer to them frequently and use them to instruct others who may use this accessory. If you loan someone this accessory, loan them these instructions also to prevent misuse of the product and possible injury. WARNING: This stand is designed for use with all Ryobi miter saws or slide miter saws with a blade diameter not larger than 12 in., or for other brands use a slide miter saw with a blade diameter not larger than 10 in. 2 - English