Ryobi A18MS01G Operation Manual - Page 9

OPERATION WARNING: Do not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury. EXTENSION RAIL WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this tool for the following purpose:  To provide a stable, secure work surface for a miter saw USING THE EXTENSION RAILS See Figure 10. Use the extension rails when working with larger workpieces. To extend the rails: n Loosen the extension adjustment knob. n Extend the rail to the desired position. n Tighten the extension adjustment knob. USING THE WORK STOPS See Figure 11. Raise the work stops whenever you need to make repetitive cuts of the same size. To avoid a greater risk of binding or pinching, do not use both work stops at the same time. To raise the work stops: n Loosen the work stop adjustment knob. n Raise the work stop to the desired position. n Tighten the work stop adjustment knob. WORK STOP ADJUSTMENT KNOB EXTENSION ADJUSTMENT KNOB Fig. 10 WORK STOP Fig. 11 9 - English