Samsung A402 User Manual - Page 63
PictBridge
UPC - 492430003414
View all Samsung A402 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
PictBridge ■ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. You can set up the following settings from the PictBridge menu. IMAGES PRINTER SETUP PRINT DPOF PRINT RESET : Select the pictures to be printed. : Setting up printing(AUTO SET/CUSTOM SET) : Printing pictures : Printing the DPOF files : Initializing the PictBridge functions ● Connecting the Camera to a Printer 1. Press the power button to turn the camera power on. 2. In a mode other than Voice Recording mode, press the ◀ ▶ MENU button. 2048 3. Press the LEFT/ RIGHT button and select [SETUP] SETUP menu tab. 4. Select [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 5. Select [PRINTER] menu by pressing the UP/ DOWN IMPRINT BEEP USB BACK:◀ COMPUTER PRINTER SET:OK button and press the OK button. 6. Press the menu button twice and the menu will disappear. 7. Use the supplied USB cable to connect the camera to the printer as shown below. 8. Turn on the printer to connect the camera to the printer. ※ If you selected [COMPUTER] in Step 5, when you connect the camera to your printer, the camera status lamp(Green) will illuminate and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 2 and onward. 《63》