Samsung A402 User Manual - Page 75

Beep ■ If you set the operation sound to ON, various sounds will be activated for camera startup, when button are pressed, and if there is a card error, so that you can be aware of the camera operation status. ● Setting Operation Sounds 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [BEEP] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN ◀ ▶ 2048 SETUP DATE TYPE IMPRINT BEEP BACK:◀ OFF ON SET:OK button and press the OK button. [BEEP] sub menu : OFF/ON 5. Press the menu button twice and the menu will disappear. Selecting an External Device (USB) ■ You can select an external device to which you want to connect the camera using the USB cable. ● Selecting an External Device 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [USB] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN ◀ ▶ 2048 SETUP IMPRINT BEEP USB BACK:◀ COMPUTER PRINTER SET:OK button and press the OK button. [COMPUTER] : Select this if you want to connect the camera to your PC. Refer to page 95 for instructions on how to connect the camera to your PC. [PRINTER] : Select this if you want to connect the camera to your printer. Refer to page 63 for instructions on how to connect the camera to your printer. 5. Press the menu button twice and the menu will disappear. 《75》