Samsung CFG70 User Manual - Page 35
Volume, Eco Saving Plus, Off Timer, PC/AV Mode, DisplayPort Ver. - power supply
View all Samsung CFG70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Volume Adjust the Volume controlling the JOG button LEFT/RIGHT. Eco Saving Plus The Eco Saving Plus function reduces power consumption by controlling the electric current used by the monitor panel. ――This menu is not available when Eye Saver Mode is enabled. •• Off: Deactivate the Eco Saving Plus function. •• Auto: The power consumption will automatically be reduced by about 10% over the current setting. (The reduction of power consumption depends on the customer screen brightness condition.) •• Low: The power consumption will be reduced by 25% over the default setting. •• High: The power consumption will be reduced by 50% over the default setting. Off Timer Off Timer: Turn on Off Timer mode. Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. ――This option is only available when Off Timer is set to On. ――For products for the market in some regions, the Off Timer is set to automatically activate 4 hours after the product powers on. This is done in accordance with power supply regulations. If you do not want the timer to activate, go to → System and set Off Timer to Off. PC/AV Mode Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. •• Set to PC when connected to a PC. •• Set to AV when connected to an AV device. ――Supplied for the wide models only such as 16:9 or 16:10. ――If the monitor is in HDMI1, HDMI2, DisplayPort mode and the screen says Check Signal Cable or power saving mode activates, press the JOG button to display the function-button screen and then select the icon. You can select PC or AV. DisplayPort Ver. Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2. ――Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. ――If the monitor (when set to HDMI1, HDMI2 or DisplayPort) is in power saving mode or is displaying the message Check Signal Cable or power saving mode activates, press the JOG button to display the functionbutton screen and then select the button to display the On Screen Display (OSD). You can select 1.1 or 1.2. 35