Samsung CLX-2160 User Manual - Page 56
LSU Hsync Error, Open/Close Door - replace imaging unit
View all Samsung CLX-2160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Message Install Toner Install Imaging Unit Invalid Toner Invalid Imaging Unit Low Heat Error Cycle Power LSU Hsync Error Cycle Power LSU Motor Error Cycle Power Main Motor Locked Manual Feeder Paper Empty Manual Feeder Paper Jam 0 Not Enough Space In USB Memory Network Error Meaning The color toner cartridge is not installed. The arrow indicates which color toner cartridge. The corresponding Imaging Unit of the machine is not installed. The color toner cartridge you have installed is not for your machine. The arrow indicates which color toner cartridge. The Imaging Unit of the machine is not for your machine. There is a problem in the fuser unit. A problem has occurred in the LSU (Laser Scanning Unit). A problem has occurred in the LSU (Laser Scanning Unit). There is a problem in the main motor. There is no paper in the manual feeder. Paper has jammed in the feeding area of the manual feeder. The space for USB memory device is not enough, which is for scanning and saving. There is a problem with the network. Suggested solutions Install the color toner cartridge. Install Imaging Unit into your machine. Install the a Samsung-genuine color toner cartridge designed for your machine. Install the a Samsung-genuine part designed for your machine. Unplug the power cord and plug it back in. If the problem persists, please call for service. Unplug the power cord and plug it back in. If the problem persists, please call for service. Unplug the power cord and plug it back in. If the problem persists, please call for service. Open and then close the front cover. Load paper in the manual feeder. Clear the jam. See page 11.2. Check the available USB memory space. See page 9.4. Contact your network administrator. Message Open Heat Error Cycle Power Out-Bin Full Over Heat Error Cycle Power Paper Jam 0 Open/Close Door Scan Unit Open or Paper Jam2 Paper Jam 1 Open/Close Door Tray Paper Mismatch Refilled Toner Replace Toner Meaning There is a problem in the fuser unit. The output tray of the machine is full of paper. There is a problem in the fuser unit. Paper has jammed in the feeding area of the tray. The scan unit is not securely latched. Paper has jammed in the paper exit area. Paper has jammed In the fuser area or rear cover. The paper size specified in the printer properties does not match the paper you are loading. The toner cartridge you have installed is not genuine or refilled. The arrow indicates which color toner cartridge. This message appears between Toner Empty and Toner Low status. The arrow indicates which color toner cartridge. Suggested solutions Unplug the power cord and plug it back in. If the problem persists, please call for service. Remove paper. Unplug the power cord and plug it back in. If the problem persists, please call for service. Clear the jam. See page 11.1, 11.2. Close the scan until it locks into place. Clear the jam. See page 11.2. Clear the jam. See page 11.2. Load the correct paper in the tray 1. The print quality may get poor if the refilled toner cartridge is installed, since its characteristics may significantly differ from the genuine. We recommend Samsung-genuine color toner cartridge. Replace the toner cartridge with a new one. See page 10.5. 11.4