Samsung CLX-6260 User Guide - Page 230

Wireless network setup 20 Using a network cable Machines that do not support the network port will not be able to use this feature (see "Rear view" on page 25). Printing a network configuration report You can identify the network settings of your machine by printing a network configuration report. See "Printing a network configuration report" on page 181. Your machine is a network compatible machine. To enable your machine to work with your network, you will need to perform some configuration procedures. • After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 184). • See your network administrator, or the person that set up your wireless network, for information about your network configuration. IP setting using SetIP Program (Windows) This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report. See "Setting IP address" on page 181. Configuring the machine's wireless network Items to prepare • Access point • Network-connected computer • Software CD that was provided with your machine • A machine installed with a wireless network interface • Network cable Before starting you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. To configure wireless parameters, you can use SyncThru™ Web Service. 2. Using a Network-Connected Machine 229