Samsung CLX-6260 User Guide - Page 231
Using SyncThru™ Web Service
View all Samsung CLX-6260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Wireless network setup Using SyncThru™ Web Service Before starting wireless parameter configuration, check the cable connection status. 1 Check whether or not the network cable is connected to the machine. If not, connect the machine with a standard network cable. 2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter your machine's new IP address in the browser window. For example, 3 Click Login on the upper right of the SyncThru™ Web Service website. 4 Type in the ID and Password then click Login. We recommend you to change the default password for security reasons. • ID: admin • Password: sec00000 5 When the SyncThru™ Web Service window opens, click Network Settings. 6 Click Wireless > Wizard. Wizard will help you setup the wireless network configuration. However, if you want to set the wireless network directly, select Custom. 7 Select the one Network Name(SSID) in the list. • SSID: SSID (Service Set Identifier) is a name that identifies a wireless network, access points, and wireless devices attempting to connect to a specific wireless network must use the same SSID. The SSID is case sensitive. • Operation Mode: Operation Mode refers to the type of wireless connections (see "Wireless network name and network password" on page 195). - Ad-hoc: Allows wireless devices to communicate directly with each other in a peer-to-peer environment. - Infrastructure: Allows wireless devices to communicate with each other through an access point. If your network's Operation Mode is Infrastructure, select the SSID of the access point. If the Operation Mode is Ad-hoc, select the machine's SSID. 8 Click Next. If the wireless security setting window appears, enter the registered password (network password) and click Next. 2. Using a Network-Connected Machine 230