Samsung CLX-6260 User Guide - Page 321

Scan features 27 Mac scanning Scanning from network connected machine Scanning from USB connected machine Network or wireless model only (see "Features by model" on page 7). 1 Make sure that the machine is connected to your computer and powered on. 2 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 61). 3 Start Applications and click Image Capture. If No Image Capture device connected message appears, disconnect the USB cable and reconnect it. If the problem continues, refer to the Image Capture's help. 4 Select the option you want. 5 Scan and save your scanned image. If scanning does not operate in Image Capture, update Mac OS to the latest version. Image Capture operates properly in Mac OS X 10.4.7 or higher. 1 Make sure that your machine is connected to a network. 2 Place a single document face down on the document glass, or load the documents face up into the document feeder (see "Loading originals" on page 61). 3 Start Applications and click Image Capture. 4 According to OS, follow steps below. • For 10.4 - Click Devices > Browse Devices on Menu bar. - Select your machine in Twain devices option. Make sure that Use TWAIN software checkbox is checked. - Click Connect. If a warning message appears, click Change Port.. to select port, or If TWAIN UI appears, click Change Port.. from the Preference tab and select a new port. • For 10.5 - Click Devices > Browse Devices on Menu bar. - Make sure that Connected checkbox is checked beside your machine in Bonjour Devices. 4. Special Features 320