Samsung DVD-R120 User Manual (user Manual) (ver.1.0) (English) - Page 15

Connecting & Setting UP Step 1: Unpacking Accessories Check for the supplied accessories below. G Video/Audio Cable (AC39-00073A) G RF Cable for TV (AC39-42001J) G Remote Control (AK59-00012H) G Batteries for Remote Control (AAA Size) (AC43-12002H) G EP-2 Plug Converter (3721-000117) G User's Manual (AK68-00773A) G Quick Guide (AK68-00684A) Step 2: Connecting the Antenna Cable Method 1 : Antenna + DVD Recorder + TV : No Cable box You can record non-scrambled channels by selecting the channel on the DVD Recorder. Also use this Method if you watch channels without cable box. There are several ways to connect your DVD Recorder. Select one of the following antenna connections that best suits you below. G Method 1 : Antenna + DVD Recorder + TV : No Cable box G Method 2 : Antenna +Cable box + DVD Recorder + TV : Cable box with many scrambled channels G Method 3 : Antenna + DVD Recorder + Cable box +TV : Cable box with a few scrambled channels I If you are using an off-air antenna that has 300-ohm twin flat leads, use an external NOTE antenna connector (300-75 ohm adaptor : not supplied) to connect the antenna to the DVD Recorder. Method 2 : Antenna + Cable box + DVD Recorder + TV : Cable box with many scrambled channels You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on. I If you have two separate antennas (one VHF and the other UHF), use a UHF/VHF combiner-adaptor (available at most electronics shops) to connect the antenna to the DVD Recorder. I The VHF/UHF RF OUT jack of this product sends only signals received through the antenna. It does not output Audio/ video signals. You must connect audio/video cables to view Video from the unit. (i.e. DVD playback) English -15