Samsung HC-P4741W User Manual (user Manual) (ver.1.0) (English) - Page 10
Installation, Connecting VHF and UHF Antennas
View all Samsung HC-P4741W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
C h a p t e r Tw o INSTALLATION Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see "Antennas with 300-ohm Flat Twin Leads," below. If your antenna has one lead that looks like this, see "Antennas with 75-ohm Round Leads," on next page. If you have two antennas, see "Separate VHF and UHF Antennas," on next page. Antennas with 300-ohm Flat Twin Leads If you are using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300-ohm twin flat leads, follow the directions below. 1 Place the wires from the twin leads under the screws on the 300-75 ohm adapter (not supplied). Use a screwdriver to tighten the screws. 2 Plug the adapter into the "ANT IN" terminal on the rear panel. English - 10
Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like this, see
“
Antennas
with 300-ohm Flat Twin Leads,
”
below.
If your antenna has one lead that looks like this, see
“
Antennas with
75-ohm Round Leads,
”
on next page.
If you have two antennas, see
“
Separate VHF and UHF Antennas,
”
on
next page.
English - 10
I
NSTALLATION
Chapter Two
1
Place the wires from the twin
leads under the screws on the
300-75 ohm adapter (not
supplied). Use a screwdriver
to tighten the screws.
2
Plug the adapter into the
“
ANT
IN
”
terminal on the rear panel.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or
“
rabbit ears
”
) that has 300-ohm
twin flat leads, follow the directions below.