Samsung HLT7288W User Manual (ENGLISH) - Page 21

Memorizing the Channels Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH and CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels(automatic) and adding or deleting channels(manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV(i.e. an air or a cable system). 1 Press the MENU button. Press the ▲ or ▼ button to select Channel, then press the ENTER button. Press the ENTER button to select Antenna. Channel Antenna : Air  Channel List Auto Program Clear Scrambled Channel Fine Tune Signal Strength LNA : On 2 Press the ▲ or ▼ button to select Air or Cable, then press the ENTER button. Channel Antenna :AAirir  Channel List Cable Auto Program Clear Scrambled Channel Fine Tune Signal Strength LNA : On Storing Channels in Memory (Automatic Method) 3 Press the ▲ or ▼ button to select Auto Program, then press the ENTER button. 4 Press the ▲ or ▼ button to select an antenna connection, then press the ENTER button. ➢ Air: "Air" antenna signal. Cable: "Cable" antenna signal. Air+Cable: "Air" and "Cable" antenna signals. ➢ If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is connected to ANT 2 IN (AIR), select Air. ➢ If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air+Cable. ➢ If you selected Air, then go to step 6. 5 Press the ◄ or ► to select the correct analog signal source among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable, select the signal source for both Analog and Digital. ➢ STD, HRC, and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. 6 The TV begins memorizing all available stations. When pressing the ENTER button during a storing process, the message Would you like to stop the auto channel selection? is displayed. Select Yes by pressing the ◄ or ► button. Press the EXIT button to exit. ➢ The TV must be connected to an antenna/cable in order to receive digital TV signals. Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control. ➢ All available DTV and analog channels are automatically stored in memory. It takes approximately 3 to 10 minutes to memorize channels. English - 21 Auto Program Select the antennas to memorize Air Cable Air+Cable Move Enter Auto Program Select the cable system. Analog STD HRC Digital STD HRC Start Start Start Return IRC IRC Move Enter Return Auto Program Auto Program in Progress. Air 10 3% Digital Channels are added on the favorite channel list. Stop Enter Return Auto Program Would you like to stop the auto channel selection ? Air 10 3% Digital Channels are added on the favorite channel list. Yes No Move Enter Return Auto Program Auto Program is incomplete. 3 channels are memorized. Air : 1 Cable : 2 OK Enter Return