Samsung LA32B450 User Manual - Page 31
Issue, Solution, Signal Information, Cable, Channel, Store Demo, Home Use, Plug &, SOURCE, Setup - specifications
UPC - 638940512439
View all Samsung LA32B450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Issue Solution Others Picture is not shown in full screen Black bars on each side will be shown on HD channels when displaying upscaled SD (4:3) contents. Black bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV. Adjust picture size option on your external device or TV to full screen. Remote control does not work. ● Replace the remote control batteries with correct polarity (+ -). ● Clean the transmission window located on the top of the remote. ● Try pointing the remote directly at the TV from 5~6 feet away. Can not control TV power or volume with Cable/Set top box remote control. ● Program the Cable/Set top box remote control to operate the TV. Refer to Cable/Set top box user manual for SAMSUNG TV code. 'Not Supported Mode' message. ● Check the supported resolution of the TV and adjust the external device's output resolution accordingly. Refer to resolution settings in this manual. Plastic smell from TV. ● This smell is normal and will dissipate over time. TV Signal Information is ● This function is only available with digital channels with an Antenna(RF/Coax) unavailable in the Self Diagnostic connection (Air or Cable). Test menu. TV is tilted to right or left side. ● Remove the stand base from TV and reassemble. Can not assemble stand base. ● Make sure TV is placed on flat surface. If can not remove screws from TV, please use magnetized screw driver. Channel menu is grey out (unavailable). ● Channel menu is only available when TV source is selected(Antenna or Cable). Your settings are lost after 30 minutes or every time TV is turned off. Intermittent loss of audio or video. ● If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the SOURCE button to select TV mode, go to MENU → Setup → Plug & Play → ENTERE. ● Check cable connections and reconnect. ● Can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough for long term use. If wall mounting, we recommend using cables with 90 degree connectors. You may see small particles if you ● This is part of the product's design and is not a defect. look closely at the edge of the bezel surrounding the TV screen. N Some of above pictures and functions are available at specific models only. [450_Aus]BN68-02041A-03Eng.indb 29 English - 29 2009-09-16 �� 11:07:52