Samsung LN-S2338W Quick Guide (easy Manual) (ver.1.0) (English) - Page 27

Troubleshooting, Identifying Problems, Appendix, Specifications - stand

Get Samsung LN-S2338W PDF manuals and user guides View all Samsung LN-S2338W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Troubleshooting Identifying Problems If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor picture Try another channel. Adjust the antenna. Check all wire connections. Poor sound quality. Try another channel. Adjust the antenna. No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. No sound or sound is too low at maximum volume. First, check the volume of units connected to your TV (Digital broadcasting receiver, DTV, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly. Picture rolls vertically. Check all wire connections. The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again. Remote control malfunctions Replace the remote control batteries. Clean the upper edge of the remote control (transmission window). Check the battery terminals. "Check signal cable. PC" message. Ensure that the signal cable is firmly connected to the PC sources. "Not Supported Mode" message. Check the maximum resolution and the frequency of the Video Adaptor. Compare these values with the data in the Display Modes. The image is too light or too dark. Adjust the Brightness and Contrast. Horizontal bars appear to flicker, jitter or shimmer on the image. Adjust the Coarse tuning and then adjust the Fine tuning. Appendix Specifications Model Name Screen Size (Diagonal) Power Supply Power Consumption PC Resolution Sound Output Dimension (WxDxH) Body With stand Weight With stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity LN-S2338W 23 inches AC 110-120V 60Hz 100 W 1280 x 720 @ 60 Hz 3W X 2 23.0 X 3.5 X 17.4 inches (583.0 X 90.0 X 443.0mm) 23.0 X 8.1 X 19.1 inches (583.0 X 206.0 X 485.0mm) 19.0 Ibs (9.0 kg) 50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing English-25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
English-25
Specifications
Model Name
Screen Size (Diagonal)
Power Supply
Power Consumption
PC Resolution
Sound
Output
Dimension (WxDxH)
Body
With stand
Weight
With stand
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LN-S2338W
23 inches
AC 110-120V
6
0Hz
100 W
1280 x 720 @ 60 Hz
3W X 2
23.0 X 3.5 X 17.4 inches (583.0 X 90.0 X 443.0mm)
23.0 X 8.1 X 19.1 inches (583.0 X 206.0 X 485.0mm)
19.0 Ibs (9.0 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%, non-condensing
-4 °F to 113 °F (-20 °C to 45 °C)
5% to 95%, non-condensing
Identifying Problems
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Poor picture
Poor sound quality.
No picture or sound.
No sound or sound is too low at
maximum volume.
Picture rolls vertically.
The TV operates erratically.
Remote control
malfunctions
“Check signal cable. PC”
message.
“Not Supported Mode” message.
The image is too light or too dark.
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Possible Solution
±
Try another channel.
±
Adjust the antenna.
±
Check all wire connections.
±
Try another channel.
±
Adjust the antenna.
±
Try another channel.
±
Press the
SOURCE
button.
±
Make sure the TV is plugged in.
±
Check the antenna connections.
±
First, check the volume of units connected to your TV
(Digital broadcasting receiver, DTV, DVD, cable broadcasting receiver, VCR, etc.).
Then, adjust the TV volume accordingly.
±
Check all wire connections.
±
Unplug the TV for 30 seconds, then try operating it again.
±
Replace the remote control batteries.
±
Clean the upper edge of the remote control (transmission window).
±
Check the battery terminals.
±
Ensure that the signal cable is firmly connected to the PC sources.
±
Check the maximum resolution and the frequency of the Video Adaptor.
±
Compare these values with the data in the Display Modes.
±
Adjust the Brightness and Contrast.
±
Adjust the Coarse tuning and then adjust the Fine tuning.
Troubleshooting
Appendix