Samsung LN32B460 User Manual - Page 17

CHANNEL ¦ Channel Menu ❑ Antenna → Air / Cable Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system). T Press the TOOLS button to display the Tools menu. You can also set the Antenna by selecting Tools → Switch to Cable (or Switch to Air). N If the antenna is connected to ANT 1 IN (AIR), select Air and if it is connected to ANT 2 IN (CABLE), select Cable. N If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the antenna input you want. N If the antenna input is not selected properly, noise may appear on the screen. Channel Antenna : Air ► Auto Program Full Guide Mini Guide Default Guide : Full Guide Channel List Fine Tune ❑ Auto Program ■ Air: Air antenna signal. / Cable: Cable antenna signal. / Air+Cable: Air and Cable antenna signals N If the antenna is connected to ANT 1 IN (AIR), select Air and if it is connected to ANT 2 IN (CABLE), select Cable. N If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are connected, select the Air+Cable. N If you want to stop Auto Programming, press the ENTERE button. The Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTERE button. ❑ Full Guide / Mini Guide The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new information becomes available. O You can also display the guide menu simply by pressing the GUIDE button. (To configure the Default Guide, refer to the descriptions.) ■ Full Guide Displays the programme information as time ordered One hour segments. Two hours of programme information is displayed which may be scrolled forwards or backwards in time. ■ Mini Guide The information of each programme is displayed by each line on the current channel Mini Guide screen from the current programme onwards according to the programme starting time order. ❑ Default Guide → Mini Guide / Full Guide You can decide whether to display either the Mini Guide or the Full Guide when the GUIDE button on the remote control is pressed. ❑ Channel List For detailed procedures on using the Channel List, refer to the 'Managing Channels' instructions. (refer to pages 17~18) O You can select these options by simply pressing the CH LIST button on the remote control. ❑ Fine Tune (analog channels only) Use fine tuning to manually adjust a particular channel for optimal reception. N If you do not store the fine-tuned channel in memory, adjustments are not saved. N '*' will appear next to the name of fine-tuned channels. N To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTERE button. ❑ LNA (Low Noise Amplifier) → On / Off If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). N LNA functions only when antenna is set to Air or Cable. N The LNA setting must be made separately for each channel. N If the picture is noisy with the LNA set to On, select Off. English - 15